Eline-technology PRO3 User Manual Manuel d'utilisateur

　1　Ｎｅｔ　ＤＶＲPreface Thank you for selecting our products. We will offer the best service for you wholeheartedly. We take 16 channel DVR (960H)

　10Ｕｓｅｒ　Ｍａｎｕａｌu Storing and backup functions1. Support maximum 2 SATA HDD.2. Support data lock/unlock/delete for all recording files/pictures.3. The m

　11　Ｎｅｔ　ＤＶＲ5. Support control PTZ/lens/wiper by network.6. Firmware upgrade through network makes after sale service much easier.7. Support FTP upgrad

　12Ｕｓｅｒ　Ｍａｎｕａｌ Cautions:Chapter 3 Equipment Installation and Illustration 3.1 Installation Environment and Cautions Instal

　13　Ｎｅｔ　ＤＶＲ1. Recommend high speed hard disk above 7200 rpm.2. The capacity of the single hard disk is above 32GB at least, each HDD can max support 3

　14Ｕｓｅｒ　Ｍａｎｕａｌ 3.3.4 Alarm Input/Output ConnectionAlarm input: Input resistance: 22K , window contrast voltage (3.0V-4.18V).(Note: There will be a

　15　Ｎｅｔ　ＤＶＲIf the distance between the probe and DVR is too far, the probe requires a separate power supply:Please connect 2 side to ground if conditi

　16Ｕｓｅｒ　ＭａｎｕａｌIf we parallel connected the sensor, the DVR can not recognize the triggered sensor. User need to have a resistance.2. Alarm output conn

　17　Ｎｅｔ　ＤＶＲNormally, Alarm’s power usually is much bigger, preferably supply power separately, and do not use the DVR’s power to supply.Each series al

　18Ｕｓｅｒ　ＭａｎｕａｌAttentions for PTZ decoder connection:1. Confirm that the PTZ decoder and Net DVR are one point ground connected, or common mode voltage

　19　Ｎｅｔ　ＤＶＲ 3.4 Front Panel DescriptionS.N Name Mark Note 1 (Power) On/Off Turn on/off DVR. 2 (Number/Letter) Number/Letter 0-9/A-Z 　 1

　2Ｕｓｅｒ　ＭａｎｕａｌCONTENTPreface...

　20Ｕｓｅｒ　Ｍａｎｕａｌ3 (Function keys) Format (Zoom-) 　 1. Shift between single and multi channel video when in real time display. 2. It means “zoom-” w

　21　Ｎｅｔ　ＤＶＲ5 (Indication lamp area) POWER 　 While supply power to DVR and the system running, this lamp will be lighted. When power supplier cut o

　22Ｕｓｅｒ　Ｍａｎｕａｌ 3.5 IR Remote Controller OperationeLineTechnology.com

　23　Ｎｅｔ　ＤＶＲ(Note: F1 and F2 are preserved functional keys.)Keystroke instruction 1. Power 14. 9WXYZ 27. Menu 2. Mute 15. CALL 28. VGA/TV 3. +, Foc

　24Ｕｓｅｒ　Ｍａｎｕａｌ Besides front panel and remote controller, mouse also can be used to control the DVR’System.Right click the mouse: 3.6 Mo

　25　Ｎｅｔ　ＤＶＲDouble left click the mouse:1. Double left click in preview can switch single channel and multi channel.2. Double click the mouse can clear

　26Ｕｓｅｒ　Ｍａｎｕａｌ 3.7.1 Menu Structure Chart 3.7 Menu Operation DescriptionMain MenuTime inquiryEvent inquiryDatamanagementTimeGeneralOutputCOM

　27　Ｎｅｔ　ＤＶＲ 3.7.2 Menu Option ScheduleMenu Instruction Data Inquiry Time Inquiry Query the record/pictures by time, and with video data graphical d

　28Ｕｓｅｒ　ＭａｎｕａｌRecord Setup Screenshots Parameter 4. Screenshot period: 1-5S, screenshot Number: 1 pcs (schedule, motion, alarm); 5. Enable the screens

　29　Ｎｅｔ　ＤＶＲSystem Setup General Setting 1. Host name, Open remote control lock, Host id; 2. Video standard: PAL/NTSC; 3. Resolution: 1024*7

　3　Ｎｅｔ　ＤＶＲ3.3.6 Keyboard Controlling...

　30Ｕｓｅｒ　ＭａｎｕａｌSystem Setup PTZ Setting PTZ protocol, address code, channel copy function. Network Setting 　Network Setting DHCP, IP address, reser

　31　Ｎｅｔ　ＤＶＲHDD Management HDD Group Set the HDD and record channel belong to different group, display the HDD total capacity, free capacity, recor

　32Ｕｓｅｒ　ＭａｎｕａｌShutdown Logout Logout. Shutdown Shutdown (please press the power switch on front panel when use this option to shutdown). Reboot Reboot

　33　Ｎｅｔ　ＤＶＲ Chapter 4 Device Operation 4.1.2 System Login Power on: After connected up the power cable, the front panel of the DVR will start a

　34Ｕｓｅｒ　Ｍａｎｕａｌ1. Menu icon: Single click “ ” in login status to access the main menu. 4.1.3 System Lock When the system is in login status, use

　35　Ｎｅｔ　ＤＶＲ4.2 Power on Wizzard After device boot, you can do simple configuration through power on wizzard to make DVR working normal and the i

　36Ｕｓｅｒ　Ｍａｎｕａｌ4.3 Data Inquiry and Playback Enter the playback interface by press “Play” on the remote controller and right directional button t

　37　Ｎｅｔ　ＤＶＲl Choose the record type in combobox.l Use mouse to choose the data then click “Play” to playback or double click the data by mouse to

　38Ｕｓｅｒ　Ｍａｎｕａｌ3. Auto pop-up clip and backup window, as the left picture:4. Set the parameter (save device, file saved type, backup player), then clic

　39　Ｎｅｔ　ＤＶＲ 4.3.3 Data Management You can lock, unlock or delete the files in “Data Management”, the interface as the right picture:l Choose t

　4Ｕｓｅｒ　Ｍａｎｕａｌ4.4.1 Quick Backup...

　40Ｕｓｅｒ　Ｍａｎｕａｌ 4.4.1 Quick Backup1. In backup management interface, click “Quick backup” after choose the backup channel, file status, select record

　41　Ｎｅｔ　ＤＶＲ 4.5 Record Setup Record setting menu as right picture: 4.5.1 Record Parameter Before using the record function, it is

　42Ｕｓｅｒ　Ｍａｎｕａｌ 4.5.2 Screenshots Parameter Before using DVR snapshot function, please set the snapshots parameters. It will be related to pictur

　43　Ｎｅｔ　ＤＶＲ 4.5.4 Manual Record Manul Record interface is as follows:l When enable manual record, the color of channel button is blue. Disabl

　44Ｕｓｅｒ　Ｍａｎｕａｌ Follow below steps to enter Schedule Record interface:1. Select the corresponding channel No..2. Deployment time: choose the recor

　45　Ｎｅｔ　ＤＶＲStep3: Define the motion detection sensitivity level: There have 5 levels: 1(lowest level )~5(Highest level). When the system detect that h

　46Ｕｓｅｒ　Ｍａｎｕａｌ 4.6.2 Sensor Sensor alarm recording setting steps:Step1: Enter “Main Menu” -> “Record Setup” -> “Record Para.” interface t

　47　Ｎｅｔ　ＤＶＲl Full screen: When preview image have multi-channels, if system detect alarm, the alarm channel will full screen display.l Alarm outpu

　48Ｕｓｅｒ　Ｍａｎｕａｌ 4.7 System Setup System Setup have sub-menu: General Setting, Time Setting, Output Setting, COM Setting,PTZ Setting and

　49　Ｎｅｔ　ＤＶＲ Enter “Main Menu” -> “System Setup” -> “Time” interface as below:l Time Setting:l DST Setting: Click the “DST” button

　5　Ｎｅｔ　ＤＶＲ4.8.1 Basic Information...

　50Ｕｓｅｒ　Ｍａｎｕａｌl NTP Setting:NTP: NTP (Network Time Protocol) means to get current time from remote server via network to as DVR system time. Please

　51　Ｎｅｔ　ＤＶＲ1. Channel Setting Enter into “Output” -> “Channel Setting”, the interface is the right figure above. You can set channel name, vid

　52Ｕｓｅｒ　Ｍａｎｕａｌ(4) Video adjustmentl Click “Video adjustment” button in channel setting interface to enter into channel parameter setting interface.

　53　Ｎｅｔ　ＤＶＲ Enter into “Main Menu” -> “System Setup” -> “COM”, the interface is as follows. You can make your DVR communicate with COM devi

　54Ｕｓｅｒ　Ｍａｎｕａｌ 4.7.5 PTZ Setting Enter into PTZ Setting interface by “Main Menu” -> “System Setup” -> “PTZ Setting”, the interface is as fo

　55　Ｎｅｔ　ＤＶＲl Setting and calling preset point by mouse:software-keyboard, then click “Preset” to activate the setting. Then turn the PTZ to another

　56Ｕｓｅｒ　Ｍａｎｕａｌ1. Network Setting Enter into “Network” -> “Network”, the interface is the right figure above:l DHCP: If there have DHCP serve

　57　Ｎｅｔ　ＤＶＲMultiple port: The default port is start with 8000.Note: If there are 2 DVRs or above in one section of the net, please ensure that the mul

　58Ｕｓｅｒ　Ｍａｎｕａｌ4. PPPOE Select “Network” -> “PPPOE”, and the interface is as follows:PPPOE is one of the mode to connect to the WAN: Connect to

　59　Ｎｅｔ　ＤＶＲ5. Email Setting After login, enter into email setting interface follow “Network” -> “Email setting”, the functions support email up

　6Ｕｓｅｒ　ＭａｎｕａｌChapter 2 Technology Guideline and Main Functions 2.1 Technology GuidelineChapter 1 Brief Introduction about the DVR 1.1

　60Ｕｓｅｒ　Ｍａｎｕａｌ7. Compound Channel After entered into “Compound Channel” interface, you will have below interface:Compound channel function is that

　61　Ｎｅｔ　ＤＶＲ 4.8 HDD Management After login, you can check the HDD General Information, HDD Group Setting and SMART Information by “Main

　62Ｕｓｅｒ　Ｍａｎｕａｌ You can check the general information of HDD in HDD management, the interface is as follows:1) Check the HDD general information:

　63　Ｎｅｔ　ＤＶＲ 4.8.2 HDD GroupNote: You can choose the right channel record to specified HDD group. It can take you follow convenience:1) Can make sur

　64Ｕｓｅｒ　Ｍａｎｕａｌ System information will display the interface as follows: 4.9.2 Record Status Can quickly query system current record state

　65　Ｎｅｔ　ＤＶＲ Alarm status interface as follows: Display 4 kinds of alarm information of each channel: Sensor Alarm (Red mark), Motion Alarm (

　66Ｕｓｅｒ　Ｍａｎｕａｌ Log inquiry interface as follows:l Note: The log total number of the day which you inquired (Log information max support 1023 da

　67　Ｎｅｔ　ＤＶＲ 4.10 System Maintenance Open “Main Menu” -> “System Maintenance” to quick set and manage users etc., the interface is as

　68Ｕｓｅｒ　Ｍａｎｕａｌ 1. User Managementl Add/delete user: Focus the cursor on the “Add” icon and click to add new user, move the cursor to select the user

　69　Ｎｅｔ　ＤＶＲEncode Para.: Record mode (All); Encoding stream type (VBR); Definition (FD1); Bitrate (2M); Image quality (High); Frame rate (25fps); Audi

　7　Ｎｅｔ　ＤＶＲ Video output:2. Audio parameters1 channel composite video output, PAL (625 line), NTSC (525 line), BNC (1Vp-p, 751 channel analog video

　70Ｕｓｅｒ　ＭａｎｕａｌØ The procedure is as follows:1. Connect the Net DVR to PC by coherent network cable or LAN (pay attention to IP conflict).2. Before upg

　71　Ｎｅｔ　ＤＶＲ3. FTP upgrade Operation steps:1. Open the FTP server software, configure it follow the setup wizard. Create user name andpassword in

　72Ｕｓｅｒ　Ｍａｎｕａｌ 4.13 Power Resume When system is in standby or running state, if system was cut off power supply abnormally, after the po

　73　Ｎｅｔ　ＤＶＲ Appendix 1 IE Operation Instructions Notice: Please set firewall rank for low

　74Ｕｓｅｒ　Ｍａｎｕａｌ2. WAN Operation InstructionsStep1: If there are fixed WAN IP address which could be given to the host DVR, you could connect DVR to WA

　75　Ｎｅｔ　ＤＶＲ[3]Port Description: The command port is the TCP port of all DVRs communications, and HTTP port is IE browser port.[2] Select “Transfer Rul

　76Ｕｓｅｒ　Ｍａｎｕａｌ[3] Port Description: The command port is the TCP port of all DVRs communications, and HTTP port is IE browser port.Input the address li

　77　Ｎｅｔ　ＤＶＲ Appendix 2: Net DVR Q&A Thank you for choosing our DVR se

　78Ｕｓｅｒ　Ｍａｎｕａｌ04: Why does my system restart after self-check?04: 1.Check the hard disks if they are in FAT32 file format, if not, change to FAT32. 2.

　79　Ｎｅｔ　ＤＶＲ03: Why both the live display image and playback image are not showing the true color?03: Please check if you have set the parameters well.

　8Ｕｓｅｒ　Ｍａｎｕａｌ High effective RTOS and embedded processor are adopted in this series DVR, as well as all functions needed for the monitoring syste

　80Ｕｓｅｒ　ＭａｎｕａｌNOTES:

　9　Ｎｅｔ　ＤＶＲ9. Support channel title and recording time superpose.10. Support multiplex operation, can real time recording without impacting other funct